Avance information

The hoops on this page will fit some models of machines, but not all. The first thing you will need to do is to figure out which sewing field widths your model uses. Please look at these pictures and take similar measurements of the existing hoops you use with your machine. Once you know your sewing field size, select the hoop that you are interested in and then select the sewing field option that is the same as your current hoop.

Non-Magnetic Arm Versions

Magnetic Arm Versions (your hoops may look different. Look at the ends of the brackets and the measurement)

Example of what the end of the magnetic tubular arms would look like. There isn’t a compression clip to hold the hoop in place. It is held in place with magnets.

• Hoopmaster
  • Uses Chinese Style Hoops
    • 9cm, 12cm, 15cm, 20cm
    • 30×30, 15×21 (53×35)
• Single Head Machine
  • Avancé 1501C – 2020
    • TJ360 and TJ600 ONLY
    • Max Depth Hoop – 13×16”
    • Max Width Hoop – 10×19”
  • Avancé 1501C – Classic
    • Can do 360, 500, and 600 spacing.
    • Max Depth Hoop – 13×16”
    • Max Width Hoop – 10×19”
  • Avancé 1201C (2020-2021)
    • Square style hoops
    • If you have this machine with square hoops, you should actually order from the Brother PR 6 needle page as the brackets needed are the same as this brand.
    • Click here to go to that page
      • Max 8×13
  • Avancé 1201C (End of 2021) – tubular arms should be magnetic
    • CH400B
    • CH548B
      • Max 8×13
• Two Head Machine
  • Avancé 1502
    • Can do 360, 500, and 600 spacing.
    • Max Depth Hoop – 13×16”
    • Max Width Hoop – 10×19”
• Avancé 1504 4-Head machines
  • Can do CH400A and TJ500 spacing.
    • Largest Mighty Hoop is a 10×10 for the CH400A
    • Can do the 12×15 without an offset bracket.
• Avancé 1506C 6-Head machine
  • Can only do the CH400A spacing on the machine.
  • The largest Mighty Hoop that will work on this machine is the 10×10