Brother PR information

The following are notes we have made about Brother PR machines.

• Mighty Hoop
  • 14×14 Flat will only work on the 10-needle machines
    • Will need a Flat table or Tubular support arm to support hoop
    • Need Split Design software
  • Brackets
    • 5.5 bracket will fit on the 4.375R, 4.25, 4×6, 5.5 and 6.25×8.25
    • 7.25 bracket will fit on the 7.25 and 6.5
      • Can also be used on the 6.25×8.25 to give more width (Special Request)
    • 8×9 bracket will only fit 8×9
      • Special bracket that only allows the hoop to only go in one way
      • “S:\Public\Instructions\PR Instructions\PR 8×9\pr 8×9 instructions.pdf”
    • 9×5 bracket will fit the 9×3, 9×5 and 9×6
      • Special bracket that only allows the hoop to only go in one way
      • “S:\Public\Instructions\PR Instructions\PR 9X5\pr 9×5 instructions.pdf”
    • 8×13 bracket come in 2 different versions and 2 different widths.
      • Tubular style brackets – Used for Shirts, Sweatshirts, Bags and Totes
        • 8×13 Tubular Brackets 6 needle
          • Will work on 6 and 10 needle machines
            • Approximate 7.25” x 11.5” sew able area
          • Will also be used for the 4.25×13 Horizontal
        • 8×13 Tubular Brackets for 10 needle
          • Will on work on the 10 needle machines
            • Approximate 7.25” x 11.75” sew able area
      • Flat style Brackets – Used for blankets, quilts, & large jackets that are unzip or unbutton
        • 8×13 Flat Brackets 6 needle
          • Will work on 6 and 10 needle machines
            • Approximate 7.25” x 11.5” sew able area
          • Will also be used for the 4.25×13 Horizontal
        • 8×13 Flat Brackets for 10 needles
          • Will only work on the 10 needle machines
            • Approximate 7.25” x 11.75” sew able area
        • 14×14 Flat
          • • Will only work on the 10 needle machines
            • Must be put on the “B” frame arms