Description

The Brother Innov-is Kit HoopMaster Home Edition offers one main station that is adjustable to 3 different angles;
one (1) hoop holding bracket, made to hold all sizes of Innov-is hoops, and two (2) backing holder blocks.

Please note that this kit and bracket will work for the 9.5×9.5, 9.5 x 14″, and 8×12″ hoops, but they may not be perfectly centered on the Station.

Please verify that the brackets and adjuster on your hoops look like this. Even if your machine is called an Innov-is model, there are a few that use a different style of bracket. For example, the Innov-is NV955 uses the SE-PE bracket and the Innov-is NV1000 uses the PC-8500. If your brackets and adjuster look like the following picture, then the Innovi-Is bracket should be correct.

Also, if your machine can use a hoop larger than a 5×7, then it is most likely the Innov-is.

Innovis Bracket Style – Largest Sewing Area (Over 5” by 7”)

• Brother
  • Aveneer – EV1
  • DreamCreation – XE VM5100
  • DreamMaker – XE VE2200 / VE2300
  • DreamMachine – XV8500
  • Dream Machine 2 – XV8550D
  • DreamWeaver – XE VM6200D
  • Duetta – 4500D
  • Duetta – 4750D
  • Essence VM5200
  • Innov-is 1500 / 4000 / 1500D / 2500D / 2800D / 4000D
  • Innov-is BP1400E / BP2100 / BP3500D / BP3600
  • Innov-is I / Innov-is IE
  • Innov-is NQ1400E / NQ1600E / NQ1700E / NQ3500D / NQ3550W / NQ3600D / NQ3700D
  • Innov-is NV2600 / NV2600D / NV800E / NV870SE
  • Innov-is V3 / V5 / V5LE / V7 /
  • Innov-is XP1 / XP2 / XV
  • Isodore 5000
  • Luminaire 3 – XP3
  • Quattro – NV6000D
  • Quattro 2 – 6700D
  • Quattro 3 – 6750D
  • Stellair – XE1 / XJ1
•  Babylock
  • Aerial
  • Aventura / Aventura II
  • Destiny / Destiny II
  • Ellageo Plus
  • Ellegante / Ellegante II / Ellegante III
  • Ellisimo / Ellisimo Gold
  • Esante
  • Flare
  • Flourish / Flourish II
  • Journey
  • Meridian
  • Pathfinder
  • Solaris / Solaris II
  • Spirit
  • Unity
  • Vesta