This Page Was Last Modified 11/9/10

Home Kit Prices Models Available

HoopMaster fixtures are currently available
for the following Allied Grid-Lock Hoops

9cm, 12cm, 15cm, 18cm, and 21cm

Jacket Backs
Plastic 30X30cm, 24x24, and 24x30 Jacket Backs

We are working on a fixture for the new 19x20 Premium Hoop

To order new HoopMaster Allied Fixtures go to the following link


Allied now has 2 Styles of round hoops available

Allied hoops (prior to Nov. 2010)
New Premium Allied Grid-Lock Hoops (usually after Nov. 2010)
Old Allied
New Allied


Notice that the new Premium Allied round hoops have a different adjuster and at the top of the outer ring there is a little triangular bump. The old style Allied hoops will fit all Tajima or SWF HoopMaster fixtures, new or old. The new style Allied hoops will only fit fixtures made after November 2010 or fixtures that have been modified for this new premium style.

If you have an old HoopMaster fixture that is not made for the new style hoop, we can modify it for a small cost. (see below) Modified or new HoopMaster fixtures will fit both the old style and new premium style Allied hoops. The following are pictures of each style of fixture.

Tajima, SWF, Allied Fixtures
made prior to Nov. 2010

Tajima, SWF, Allied Fixtures
as of November 2010
Old Fixture
New Fixture
If you have a HoopMaster fixture made prior to Nov. 2010 and you would like to use the new Premium Allied Grid-Lock Hoops, we have the following program to replace your fixture.
This is the part we will send you
If you order the following service, we will send you a modified fixture bottom board and a return label for you to send us your old fixture bottom board back. This way you will never be without a fixture. All you will have to do is to remove the clear arms and spacers and place them on the new modified fixture. This should take less than 5 min. Then you will be able to use old style or Premium style Allied hoops, Tajima or SWF hoops.
Modified Part
Order Modified Fixture part for Allied Premium Hoops
Size of Fixture
Your Company Name

$35 plus $16 Shipping ($16 covers shipping to you and the return label)

Please include your company name in the note field as our website does not always provide this with your order.

Please note - the modified fixture will not be new, it will be a fixture we have received from another customer that has been modified. We will make sure that it is in good shape but it will not be new.

Please return your old fixture within 3 weeks of receiving your modified fixture. If we do not receive the return within 3 weeks, we will have to charge you the full cost of $200 for the fixture part.



Please call to order or for additional information

Midwest Products Inc.
W194 N11665 McCormick Dr.
Germantown, WI  53022
Phone 1-800-900-0741 or (262) 257-0930
Fax (262) 257-0934

Email Us